Siemens PCS 7 Installation Manual page 31

Requirements:
● Operating systems:
– You can find information about this in the documentation
– When selecting operating systems, orient yourself with the configurations of the pre-
● Automation systems (depending on the firmware version)
– S7 400 as of firmware version V6
– S7 400H as of firmware version V6
● Separate engineering station required.
Note
Displaying operator and OS process control messages
Locally generated operator messages and local OS process control messages are displayed
on an OS single station system.
A system-spanning overview of the operator and process control messages can be displayed
in the Process Historian / Information Server.
Web option for an OS single station system
You can access the data of an OS using the Internet Explorer. You can find information on
this in the section "Remote access via the Web Option for OS (Page 37)".
PCS 7 - PC Configuration (V8.2)
Installation Manual, 03/2016, A5E36200050-AB
7; PCS 7 Readme (online)
configured PC stations in
3.7 Solutions for single station systems
ST PCS 7 catalog.
PC components of a PCS 7 system
Process Control System PCS
31