Table of Contents
Advertisement
PC components of a PCS 7 system
3.9 Connecting PC stations
You can find additional information on this in the section "Differences between multiple station
systems and single station systems (Page 17)".
A description of an example for a small system is available in the section "Combination of
engineering station and operator station on a single PC (Page 21) ".
Example configuration
Topology
The terminal bus and system bus can be configured as follows:
● As Industrial Ethernet (10/100/1000 Mbps)
● Bus, tree, ring, star or redundant ring structures
Data communication
● Terminal bus
The following table shows data communication in the PCS 7 plant.
PCS 7 is also connected to components at higher levels, for example MES level and office
networks, via the terminal bus.
40
PCS 7 - PC Configuration (V8.2)
Installation Manual, 03/2016, A5E36200050-AB
Hide quick links:
Advertisement
Table of Contents
