HP LP 1000r Service Manual page 41

Hide thumbs Also See for LP 1000r:
Table of Contents

Advertisement

Chapter 4
Code
Description
the system FRU
data.)
0050
Processor Cooling/
Heating problem
0076
Integrated HP
NetRAID processor is
not responding.
(This does not apply
to LP 1000r)
0100
Keyboard error during
POST
0101
Keyboard error
(The LP 1000r will
complete the boot
process without a
keyboard connected.)
0102
Keyboard controller
error during POST
0103
Keyboard is not
connected.
(The LP 1000r will
complete the boot
process without a
keyboard connected.)
Problem/Solution
POST has detected a cooling fan problem.
The processor cooling-fan needs to be connected or it is not
turning fast enough to cool the processor. The system board
circuitry monitors the speed of all the fans.
This problem will prevent the operation of the Integrated HP
NetRAID, if it is enabled. The problem may also prevent
operation of some PCI slots.
1. Flash the Integrated HP NetRAID firmware and reboot the
system.
2. If the error persists, your I/O board may need to be replaced.
Contact your service representative.
A key on the keyboard has been pressed during POST of the HP
Netserver.
To correct this:
1. Ensure nothing is put on the keyboard and no key is
accidentally pressed down.
2. Reboot the Netserver.
3. If the error persists, your keyboard may need to be replaced.
Contact your service representative.
The keyboard has reported an error during its self-test.
To correct this:
1. Restart your HP Netserver.
2. If the error persists, your keyboard may need to be replaced.
Contact your service representative.
POST has detected a general failure in the integrated keyboard
controller.
To verify this error:
1. Restart your HP Netserver.
2. If the error persists, your system board may need to be
replaced. Contact your service representative to replace your
Netserver.
POST has detected the keyboard is not connected.
To correct this:
1. Verify the keyboard connector is firmly connected.
2. Reboot the Netserver.
3. If the problem persists, your keyboard cable may be
damaged or your keyboard may need to be replaced. Contact
your service representative.
Diagnostics
35

Advertisement

Table of Contents
loading

Table of Contents