Figure 14: Making Twisted-Pair Connections - Edge-Core ECS3510-28F Installation Manual

| Making Network Connections
C 4
HAPTER
Twisted-Pair Devices
C
ONNECTING TO
Attach one end of a twisted-pair cable segment to the device's RJ-45
1.
connector.

Figure 14: Making Twisted-Pair Connections

Attach the other end to an available port on the switch.
2.
Make sure each twisted pair cable does not exceed 100 meters (328 ft) in
length.
As each connection is made, the Link LED (on the switch) corresponding to
3.
each port will light green or amber to indicate that the connection is valid.
PC , H ,
S UBS AND
S
WITCHES
– 44 –