Mac Address Table Configuration Example - HP A5120 EI Series Configuration Manual

Lan switching
Hide thumbs Also See for A5120 EI Series:
Table of Contents

Advertisement

MAC address table configuration example

Network requirements
The MAC address of one host is 000f-e235-dc71 and belongs to VLAN 1. It is connected to
GigabitEthernet 1/0/1 of the device. To prevent MAC address spoofing, add a static entry into the
MAC address table of the device for the host.
The MAC address of another host is 000f-e235-abcd and belongs to VLAN 1. Because this host
once behaved suspiciously on the network, you can add a destination blackhole MAC address entry
for the MAC address to drop all packets destined for the host.
Set the aging timer for dynamic MAC address entries to 500 seconds.
Configuration procedure
# Add a static MAC address entry.
<Sysname> system-view
[Sysname] mac-address static 000f-e235-dc71 interface gigabitethernet 1/0/1 vlan 1
# Add a destination blackhole MAC address entry.
[Sysname] mac-address blackhole 000f-e235-abcd vlan 1
# Set the aging timer for dynamic MAC address entries to 500 seconds.
[Sysname] mac-address timer aging 500
# Display the MAC address entry for port GigabitEthernet 1/0/1.
[Sysname] display mac-address interface gigabitethernet 1/0/1
MAC ADDR
000f-e235-dc71
---
1 mac address(es) found
# Display information about the destination blackhole MAC address table.
[Sysname] display mac-address blackhole
MAC ADDR
000f-e235-abcd
---
1 mac address(es) found
# View the aging time of dynamic MAC address entries.
[Sysname] display mac-address aging-time
Mac address aging time: 500s
VLAN ID
STATE
1
Config static
---
VLAN ID
STATE
1
Blackhole
---
PORT INDEX
GigabitEthernet 1/0/1
PORT INDEX
N/A
25
AGING TIME
NOAGED
AGING TIME
NOAGED

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents