Chapter 4 Front Panel; Front View - Vdwall LVP605 series User Manual

Chapter 4 Front panel

4-1 Front view

1) Input select buttons
Input select buttons (V1, V2, V3, S-Video, DVI, VGA1, VGA2,
YPbPr, EXT.): Select the input signal.
2) Setup buttons
Setup button (Setup,↑,↓, Knob): Set up output image
parameters.
3) VGA automatic adjustment button
VGA automatic adjustment button (Auto): Automatically adjust
VGA input signal.
4) Seamless switching or Fade-in / Fade-out
Seamless switching or Fade-in/Fade-out (C / F)：Select the
switching effect between two different input signals. The effects
include seamless switching (CUT), Fade-in / Fade-out (time can be
set as 0.5S, 1S or 1.5S) and blending.
5) PC signal bypass output
PC signal bypass output (Bypass)：Switch between part and full
display of PC signal. The indicator shows the current state of the
input signal.
LVP605 Series User Manual
1 2
3 11 4
Figure 4-1 Front view
7 10
6 5 9 8
www.videowall.cn 8