Frontal Panel Operations; Diagram Of Frontal Panel - Vdwall LVP606A User Manual

LVP606A User's Manual
IV. Frontal panel operations

1. Diagram of frontal panel

1
1） Input preselecting button (Preselect):
While in non-PIP mode, the buttons are used to preselect the input signals,
so as to display the status of current signal and preselected signal.
While in PIP mode, the buttons are used for selecting PIP input signals.
2） Input switching button (Take):
While in non-PIP mode, those buttons are used to select input signals.
3） PIP Setup buttons(knob, ↑,↓，PIP.X,PIP.Y,):
Knob, ↑,↓: to change the location of the output window of input signals
PIP.X: to turn ON/OFF PIP function. When the indicator is ON, user can
press PreSelect buttons to select group X signals as PIP.
PIP.Y: to turn ON/OFF PIP function. When the indicator is ON, user can
press PreSelect buttons to select group Y signals as PIP.
4） Setup buttons(Setup, knob, ↑,↓)
To set the image output parameters of the processor.
5） VGA auto adjustment(VGA Auto)
To autoadjust VGA input signals.
6） Cut / Fade switching buttons: （C/F）
To select signal switching effects, and to display current status. The
Fade button can be used to set the switching time of fading in and
fading out
7） Info：
It is used to display current settings and information of processor.
8） PC signal bypass output(Bypass)
It is used to switch full screen/partial screen display of PC signals, and
the current input signal status of indicators.
9） Shortcut buttons （on/off，M1~M7，Enter，Save） ：
on/off key is applied to start/close user mode shortcut function.
---------------------------------------------------------------------------------------------------
2
Figure 3
4
5
6
9
LED VIDEO PROCESSOR
3
8
7
7