Samsung ProXpress C306x series User Manual page 299

SyncThru™ Web Service
- Email Notification: When an error occurs or the supplies are running
out, the machine sends a notification to the administrator via email. You
can set whether to use this feature or not. You can also select which
alerts to receive and when.
• Network Settings: You can set up the network environment to use your
machine as a network machine. You can also set the settings from the
machine. Refer to the network setup chapter.
- General: You can set general machine information to use in the
network and set ethernet settings. This feature is also available from the
machine.
- TCP/IPv4, TCP/IPv6, Raw TCP/IP, LPR/LPD, IPP, Telnet, WSD, SLP, UPNP,
mDNS, CIFS (Shared Folder), SNMPv1/v2, SNMPv3, FTP Print Server,
AirPrint, ThinPrint®, Google Cloud Print: You can set protocol settings.
- Outgoing Mail Server (SMTP): You can set server settings for outgoing
emails. If this setting is not configured, you cannot use scan to email
feature. Outgoing emails will be sent through SMTP server you set here.
- HTTP: You can allow or block users from accessing the SyncThru™ Web
Service.
- Proxy: You can set proxy settings and enable authentication.
- Restore Default: Clicking the Clear button under the Restore Default
section will clear security and network configurations. Restoring the
settings will take effect after the system is rebooted.
Security tab
The security tab has System Security, Network Security, User Access Control
and System Log. You cannot access this tab if you do not log-in as an
administrator (see "Logging into SyncThru™ Web Service" on page 297).
• System Security: From the SyncThru™ Web Service, select the Security tab
> System Security.
- System Administrator: Enter the system administrator's information.
The machine sends email notification to the email address set here. This
feature is also available from the machine.
- Feature Management: Specifies the services, PC application security,
physical ports, and network protocol features to use. Select the features
to use, and then click Apply.
- Information Hiding: Specifies which information to hide. Select the
amount of information that you want to hide, and then click Apply.
- Restart Device: You can reboot your machine. Click the Restart Now
button to reboot.
• Network Security: From the SyncThru™ Web Service, select the Security
tab > Network Security.
- Digital Certificate: You can manage digital certificates. A digital
certificate is an electronic certificate that verifies the secure association
between communication nodes. You need to add the certificate for SSL
communication.
299
5. Useful Management Tools