Do not disassemble, modify, or repair your device Any changes or modifications to your device can void your manufacturer’s warranty. For service, take your device to a Samsung Service Centre. When cleaning your device: Wipe your device with a towel or a rubber. Do not use chemicals or detergents.
Samsung Electronics. Trademarks • SAMSUNG, and the SAMSUNG logo are registeredtrademarks of Samsung Electronics.
Graphics used in this manual are for illustration purposes. The actual products may vary. Your Mobile Pen Overview Charging socket Charging indicator Status indicator Side button Pen cap Charging indicator Status indicator Micro USB cover ▲ Front 30pin clip for Clip for paper tablet Power button...
The pen and receiver has a rechargeable internal battery which is non-removable. Make sure they are fully charged before using it for the first time. Use only Samsung-approved chargers. Connect the travel adapter to the charging socket on the pen or receiver.
Holding the Mobile Pen Hold the pen like you would hold a normal pen or pencil. Make sure the pen button is in a convenient location where you can use it with your thumb or forefinger. Do not hold the tip of the pen with your fingers. It may interrupt communication between the pen and receiver.
In Pairing mode, two devices should be placed close enough. Select SAMSUNG Mobile Pen from the list of devices. If they are successfully connected, the status indicator will flash in every 6 seconds of interval after rapidly flashing three times.
Resetting connectivity settings If you want to reset the connectivity settings in the Mobile Pen: In Pairing mode, press the reset button on your receiver. The status indicator flashes blue and red and then turns off. When you reset the receiver, all connection settings in the receiver will be deleted and the connection with your tablet will be lost.
Calibrating the Mobile Pen Calibrate the Mobile Pen so the tablet detects its position properly. Attach the receiver to the tablet or to a piece of paper, depending on usage and then pair and connect the Mobile Pen with your tablet. Calibration on the Mobile Connector Select application.
Using on screen Attaching the receiver to the tablet Push the bottom of the 30pin and lift it gently. Pivot the 30pin out using the slot on the 30pin until the pin clicks into place. Insert the 30pin into the multifunction jack on your tablet.
Operating Mobile Pen on screen Mobile Pen lets you use all the great features of your device in addition to traditional controls, such as tapping or flicking. • Pair and connect the Mobile Pen with your tablet and calibrate it before use. •...
Using on paper Attaching the clip to the paper Locate the receiver at the top center of the paper. Open the clip and insert the piece of paper. Locate the receiver at the top center of the paper to improve reception. Working Area Receiver Receiver...
Write on paper in portrait orientation to have more available space. Operating Mobile Pen on paper Use the Mobile Pen as you would use a normal pen or pencil to write or draw on the paper. Your tablet automatically stores handwriting memos and displays them on your tablet. •...
Correct disposal of this product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life.
(place and date of issue) (name and signature of authorised person) * It is not the address of Samsung Service Centre. For the address or the phone number of Samsung Service Centre, see the warranty card or contact the retailer where you purchased your...
Part 15.19 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Part 15.21 Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may...