Samsung ProXpress C306x series User Manual page 53

Media and tray
8
Using the output support
The surface of the output tray may become hot if you print a large number
of pages at once. Make sure that you do not touch the surface, and do not
allow children near it.
The printed pages stack on the output support, and the output support will help
the printed pages to align. Unfold the output support.
Illustrations on this user's guide may differ from your machine depending
on its options or models. Check your machine type (see "Front view" on
page 18).
9
Preparing originals
• Do not load paper smaller or larger than custom size.
- Scan glass: X : 216 mm ( 8.50 inches), Y: 297 mm (11.69 inches)
- Document feeder (ADF or RADF): X: 148 - 216 mm ( 5.83 x 8.50 inches),
Y: 210 - 356 mm (8.27 x 14.02 inches)
• Do not attempt to load the following s of paper, in order to prevent paper
jam, low print quality and machine damage.
- Carbon-paper or carbon-backed paper
- Coated paper
- Onion skin or thin paper
- Wrinkled or creased paper
- Curled or rolled paper
- Torn paper
• Remove all staples and paper clips before loading.
• Make sure any glue, ink, or correction fluid on the paper is completely dry
before loading.
• Do not load originals that include different sizes or weights of paper.
• Do not load booklets, pamphlets, or documents with other unusual
characteristics.
2. Menu Overview and Basic Setup
53