Samsung ProXpress C306x series User Manual page 167

Wired network setup
DHCPv6 address configuration from the control panel
If you have a DHCPv6 server on your network, you can set one of the following
options for default dynamic host configuration.
1 Select (Menu) > Network > TCP/IP (IPv6) > DHCPv6 Config on the
control panel.
OR
For the model with a touch screen, press
> Next > Network Setup > TCP/IP (IPv6) > DHCPv6 Config on the
touch screen.
2 Select the required value you want.
• Always Use: Always use DHCPv6 regardless of router request.
• Never Use: Never use DHCPv6 regardless of router request.
• Router: Use DHCPv6 only when requested by a router.
Activating from the SyncThru™ Web Service
1 Check whether the machine is connected to the network.
2 Start a web browser such as Internet Explorer, Safari, or Firefox and enter
your machine's new IP address in the browser window.
For example,
(Setup) > Machine Setup
3 Click Login in the upper right of the SyncThru™ Web Service website.
4 Type in the ID and Password, then click Login. If it's your first time
logging into SyncThru™ Web Service, type in the below default ID and
password. We recommend you to change the default password for
security reasons.
• ID: admin
• Password: sec00000
5 When the SyncThru™ Web Service window opens, move the mouse
cursor over the Settings of the top menu bar and then click Network
Settings.
6 Click TCP/IPv6 on the left pane of the website.
7 Check the IPv6 Protocol check box to activate IPv6.
8 Click the Apply button.
Turn the machine off and turn it on again.
9
• You can also set the DHCPv6.
• To manually set the IPv6 address:
Check the Manual Address check box. Then, the Address/Prefix text
box is activated. Enter the rest of the address
(e.g.,:3FFE:10:88:194::AAAA. "A" is the hexadecimal 0 through 9, A
through F).
2. Using a Network-Connected Machine
167