Printeron - Samsung ProXpress C306x series User Manual

PrinterOn

Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 28).
To change the menu options:
• Press (Menu) > PrinterOn on the control panel.
• Or press (Setup) > Admin Setup > Next on the touch screen.
You can enable the PrinterOn feature in the PrinterOn menu.
Before you can use the PrinterOn feature, you must configure the network
connection of the machine. If you cannot connect to the machine after
configuring its network connection, then you may have to check the
external internet connection of the network.
When the PrinterOn feature is enabled, you can set it to Release Code
mode or Auto mode. These modes can be changed on the PrinterOn server.
• Release Code: Users must enter a Release Code to print a document
sent through PrinterOn.
• Auto: The machine automatically prints documents sent through
PrinterOn without the user entering a Release Code.
248
3. Useful Setting Menus