Speaker Connection - Ferguson AV-660 Operator's Manual

CONNECTION
Connecting loudspeakers
To avoid damaging the speakers with a sudden high-level signal, be sure to switch the power off before connecting the
speakers.
Check the impedance of your speakers. Connect speaker with an impedance of 8 ohms or more.
The amplifier's red speaker terminals are the + (positive) terminals and the black terminals are the – (negative) terminals.
The diagram below shows how loudspeakers are made.
Please note that all connections are made via loudspeaker cable except the subwoofer which is connected via a standard
phono cable.
RS
L LS C
R RS SUB
SUB LINE OUT
6.1 DIRECT IN
FRONT
R
RS LS
BS
SPEAKERS 8
SUBWOOFER
BS
BS RS CENTER
CENT ER
8
LS
L
RIGHT LEFT
SPEAKERS 8
FRONT
L