Table of Contents
Advertisement
BASIC OPERATION
BASIC OPERATION 1
POWER
STAN DB Y
1. Press the POWER button to ON.
2. Press STANDBY button to switch on the unit.
3. Select
the
desired
corresponding button.
DVD (ANA, COAX)
VIDEO 1 (ANA, COAX.)
VIDEO 2 (ANA, OPT.)
VIDEO 3 (ANA)
TUNER (FREQUENCY)
TAPE
AUX
Note: INPUT MODE is used to select one of the 3
Modes.
ANA→OPT→COAX
When DVD, VIDEO 1, VIDEO 2 is selected, press the
INPUT
MODE
button
"OPTICAL" or "COAXIAL" in accordance with your
connection.
If
appears on the display:
A digital input source (OPT or COAX) has been
selected, and the source is connected successfully.
If " UNLOCK" appeared for 5 seconds on the display:
The source is not connected properly or the source is
not switched on.
In that case, connect and switch the source on, or
select ANALOG by pressing the INPUT MODE button.
4. Play the source, and gradually turn up the volume to
the required level with the MASTER VOLUME
control.
BASIC OPERATION 2
A. POWER & STANDBY/ON button
Press this button to turn the power on/off.
The STANDBY indicator lights up in power standby
mode and goes out when this unit is turned on.
B. STEREO
With the unit in the STEREO mode, only Front Left and
Front Right Speaker and Woofer have output.
C. PRO LOGIC IIx
Dolby® Pro Logic® IIx technology (PLIIx) is an
extension of Dolby Pro Logic II (PLII) matrix-decoding
technology. Dolby Pro Logic IIx technology offers
decoders more flexibility in deriving additional outputs to
take better advantage of all the amplifiers and speakers
found in higher-end surround systems, and to do so from
a wider range of program material and sources.
There are two standard modes: Movie, Music.
3
MAS TER V OLUME
source
by
pushing
and
select
"ANALOG",
How to get PL II x:
After power on this unit
1. Press the DOLBY PL IIx button on the front panel or
on the remote, you will get SURROUND BACK 1
SPEAKER DOLBY PL II x 6 MOVIE (factory default
mode), press one of these buttons again, you will get
SURROUND BACK 1 SPEAKER DOLBY PL II x 6
MUSIC;
2. Press the SURROUND BACK button on the front
panel or on the remote, you will get SURROUND
BACK OFF DOLBY PL II MUSIC (if the previous
mode is movie mode, you will get SURROUND BACK
the
OFF DOLBY PL II MOVIE), by this time, if you press
DOLBY PL IIx button, you will get SURROUND
BACK OFF DOLBY PL II MOVIE;
3. Press the SURROUND BACK button on the front
panel or on the remote, you will get SURROUND
BACK 1 SPEAKER DOLBY PL II x 6 MOVIE
MODE, by this time, if you press DOLBY PL IIx button,
you will get SURROUND BACK 1 SPEAKER
DOLBY PL II x MUSIC MODE.
Note: During the press, the corresponding wording
appears on the display.
D. SURROUND MODE
This mode is possible to achieve a realistic sound field
with a "three dimensional" feel, giving the sense of
distance, movement and relative position, and creating a
surprisingly real and powerful sense of presence when
playing movie software in AV rooms.
There are six surround modes: PASSTHRU, MOVIE,
MUSIC, ROOM, THEATER and HALL,
E. DIRECT IN
Press this button when you want to enjoy the 6 discrete
channels of high quality digital audio from DTS/AC3
program source.
F. RESET
When this unit is ON, use a paper clip to press this button
for more than 3 seconds to reset the whole system
(including memories).
G. PHONES jack
For private listening, insert optional (not included)
headphones (1/4-inch plug) into the PHONES jack, and
then the center and surround speaker will be cut
automatically. (Note: When the headphone is used, the
output will down mix to STEREO automatically.)
H. AV 3 IN
The input ports are for VCR, Video Camera Recorder, etc.
It contains one optical, one S-video, one video input port
and Analog Left and Right input ports.
I. Dolby Digital EX
When using surround back speakers, the Dolby Digital
source is played back using the matrix 6.1-channel
decoder.
J. DTS-ES Discrete 6.1
With the additional of the surround back channel, this
new format has all 6.1 channels recorded independently
for a completely discrete digital format. Since all
channels
are
surround playback with the increased sound space is
achieved.
15
recorded
independently,
high-fidelity
Advertisement
Table of Contents
