Specifications - Ferguson AV-660 Operator's Manual

SPECIFICATIONS

AUDIO SECTION
Audio Power Output
Output Impedance
Total Harmonic Distortion
LINE INPUT
Input Sensitivity/Impedance
Frequency Response
Tone Control Range
Signal-Noise Ratio
WOOFER OUTPUT
Rated Output/Impedance
Frequency Response
FM TUNER SECTION
Frequency Range
Sensitivity
Antenna Terminal
TUNER SECTION
Frequency Range
Sensitivity
Signal-to-Noise Range
Antenna
VIDEO SECTION
Standard Video Jacks
Input and Output
Level/Impedance
S-VIDEO SECTION
Standard S-Video Jacks
Output Level/Impedance
GENERAL
Power Requirement
Max Power Consumption
DIMENSIONS
WEIGHT
*Design and specifications are subject to change without notice.
FRONT (L/R)
CENTER
SURR. (L/R)
SURR. BACK
FRONT (L/R)
CENTER
SURR. (L/R)
SURR. BACK
Less than 0.05%
150mV/47kΩ
20Hz~25KHz +0.5/-1dB
BASS ± 6dB
TREBLE ± 6dB
75dB
150mV/10kΩ
10Hz~300Hz +3dB
87.5~108MHz
14dB (5uV)
75 ohm (unbalanced)
522~1629kHz, 9kHz step
68 dB/M
30 dB
Loop Antenna
1 Vpp/75Ω
CA 0.3 Vpp/75Ω
YA 1 Vpp/75Ω
AC230-240V~50Hz
280Watts
350 (W) x 430 (D) x 150 (H) mm
11kg
22
100W RMS x 2 (8 ohm, 1% THD)
100W RMS (8 ohm, 1% THD)
100W RMS x 2 (8 ohm, 1% THD)
100W RMS (8 ohm, 1% THD)
8 ohm
8 ohm
8 ohm
8 ohm