Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTION
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1. READ AND FOLLOW INSTRUCTIONS---All the safety and operation instructions should be read before the
product is operated. Follow all operation instructions.
2. RETAIN INSTRUCTIONS---The safety and operation instructions should be retained for future reference.
3. HEED WARNINGS---Comply with all warnings on the product and in the operation instructions.
4. CLEANING---Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
5. GROUNDING or POLARIZATION---This product may be equipped with a polarized alternating current line plug
(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to
fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
6. OVERLOADING---Do not overload wall outlets or extension cord as this can result in a
risk of fire or electric shock. Overloaded AC outlets, extension cords, frayed power cords,
damaged or cracked wire insulation, and broken plugs are dangerous. They may result in
a shock or fire hazard.
7. POWER SOURCES---This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local
Power Company. For products intended to operate from battery power, or other sources, refer to the operation
instructions.
8. ACCESSORIES---Do not place this product on an unstable surface or shelf. The product may
fall, causing serious injury to a child or adult as well as serious damage to the product. Any
mounting of the product should follow the manufacturer's instructions and use a mounting
accessory recommended by the manufacturer. A product and cart combination should be
moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and
cart combination to overturn.
9. OUTDOOR ANTENNA GROUNDING--- If an outside antenna or cable system is connected to the product, be
sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up
static charges. The example below is for reference only. Correct grounding should always be installed by an
electrician.
10. POWER-CORD PROTECTION---Power supply cord should be placed so that the power lead is not likely to be
walked on or pinched by items placed upon or against them, paying particular attention to cords at Wall plugs and
where the power lead exits from the product.
11. ATTACHMENTS---Do not use attachments not recommended by the product manufacturer as they may cause
harm to the unit.
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250.PART H)
2
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-21)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
Advertisement
Table of Contents
