Set Your Router Date And Time - TRENDnet TEW-827DRU User Manual

TRENDnet User's Guide

Set your router date and time

Advanced > Administrator > Time
1. Log into your router management page (see
on page 10).
2. Click on Advanced and click on Administrator, then click Time.
3. Review the Time settings. To save changes to this section, click Apply when finished.
Commit your changes to the router by clicking on Apply/Discard Changes in the left-
hand menu, and click Apply & Reboot.
 Time: Displays the current device time and date information.
 Enable Daylight Saving: Check the option to enable daylight savings time and set
the annual range when daylight saving is activated.
© Copyright 2016 TRENDnet. All Rights Reserved.
"Access your router management page"
You can choose one of the following options to set the device time and date:
 Automatically synchronize with Internet Time Server – Check the Enable NTP
Server option to set your router date and time to synchronize with an NTP
(Network Time Protocol) server address (e.g. pool.ntp.org). Enter the NTP server
address next to Default NTP server, (e.g. pool.ntp.org). Click the Time Zone drop-
down list to select the appropriate zone and you can optionally change your NTP
Sync period.
Note: NTP servers are used for computers and other network devices to
synchronize time across an entire network.
 Manually set time – Set your router date and time manually in the Date and Time
Settings section. Note: Time is specified in 24-hour format. In addition, you can
click Synchronize with Your Computer's Time Settings to copy the time and date
settings from your computer.
TEW-827DRU
43