Virtual Server - TRENDnet TEW-827DRU User Manual

TRENDnet User's Guide

Virtual Server

Advanced > Firewall > Virtual Server
Virtual Server (also called port forwarding) allows you to define specific ports (used or
required by a specific application) and forward them to a single IP address (a computer
or device) on your network. Using this feature is more secure compared to using DMZ
(see "DMZ" on page 42) in which DMZ forwards all ports instead of only specific ports
used by an application. An example would be forwarding a port to an IP camera
(TRENDnet IP cameras default to HTTP TCP port 80 for remote access web requests) on
your network to be able to view it over the Internet. To open several ports please refer
to "Gaming" section on page 45.
Since most ISPs constantly change your home IP address, to be able to access the Virtual
Server port(s) from the Internet it is recommended to setup Dynamic DNS service
(outlined in Identify Your Network section page 37).
1. Log into your router management page (see
on page 10).
2. Click on Advanced and click on Firewall, then click on Virtual Server.
3. Review the virtual server settings. Click Add to save settings. Commit your changes to
the router by clicking on Apply/Discard Changes in the left-hand menu, and click Apply
& Reboot.
Check the option to the left most of the entry to enable and uncheck to disable.
 Rule Enable – Check the option to enable the virtual server.
 Rule Name – Enter a name for the virtual server.
 IP Address: Enter the IP address of the device to forward the port (e.g.
192.168.10.101).
 Protocol: Select the protocol required for your device. TCP, UDP, or Both (TCP
and UDP).
 Public Port – Enter the port number used to access the device from the Internet.
 Private Port – Enter the port number required by your device. Refer to the
connecting device's documentation for reference to the network port(s) required.
© Copyright 2016 TRENDnet. All Rights Reserved.
"Access your router management page"
Note: The Public Port can be assigned a different port number than the Private
Port (also known as port redirection), however it is recommended to use the same
port number for both settings. Please refer to the device documentation to
determine which ports and protocols are required. It is recommended to assign a
static IP address to the device or use DHCP reservation to ensure the IP address of
the device does not change.
 Inbound Filter: Select the defined IP address range to allow access. (see
Filter" section on page 41).
 Schedule (Optional) – The schedule function allows you to define a schedule
when the virtual server should be turned on. To define a new schedule, click New
Schedule and refer to page 39 "
schedule, click the drop-down list and the new schedule will be available for
selection. Note: Before applying scheduling, please ensure your Time settings are
configured correct and you have defined a schedule. See page 38 to configure
Time Settings and see page 39 "
Note: In the Virtual Server List, you can edit a rule by clicking
column next to the rule you would like to edit. You can also delete a rule by clicking
under the Delete column next to the rule you would like to delete.
TEW-827DRU
Create Schedules". After you have created a new
Create Schedules" to create a schedule.
under the Edit
"Inbound
48