Product Hardware Features - TRENDnet TEW-827DRU User Manual

TRENDnet User's Guide

Product Hardware Features

Rear View
3
2
1
© Copyright 2016 TRENDnet. All Rights Reserved.
7
9
5
8
4
6
No Item Description
1 LED On/Off Button Push to turn front panel LEDs on or off.
2 USB 3.0 Ports Connect USB storage devices to share over the
network via FTP or Windows® SMB/CIFS, Samba,
BitTorrent client, iTunes Server, and DLNA server.
3 WPS Button (Wi-Fi Push and hold this button for 3 seconds and release to
Protected Setup) activate WPS. The Power LED on front panel will blink
when WPS is activated.
4 Gigabit LAN Ports 1-4 Connect Ethernet cables (also called network cables)
(Black) from your router LAN ports to your wired network
devices.
5 Gigabit WAN/Internet Connect an Ethernet cable from your router Internet
Port port to your modem.
(Yellow)
6 WiFi On/Off Button Push and hold this button for 5 seconds and release to
turn WiFi (2.4GHz & 5GHz) on or off. It may take up to
15 to completely turn on or off WiFi after the button is
released. The 2.4G and 5G LEDs will turn on or off to
indicate the WiFi status.
7 Reset Button Using a pen or paperclip, push and hold the reset
button for 15 seconds and release to reset the router.
8 On/Off Power Switch Push the router On/Off power switch to turn your
router "On" (Inner position) or "Off" (Outer position).
9 Power Port Connect the included power adapter from your router
power port and to an available power outlet.
TEW-827DRU
3