Language - Swisscom Aton CL302 User Manual

Language

Press MENU, select Settings and press OK.
ó
Select Handset Settings and press OK for confirmation.
ó
Select Language and press OK.
ó
Select the desired language and press OK to confirm.
ó
Area-Code
This setting is needed for reading from the SIM-Card and adapting to the
Swiss network. If you have a country code on the SIM-Card it will be replaced
by a 0 (zero). If you have a foreign number with "+" this will be replaced
by 00 (two zero's). The phone's default setting is prepared for the Swiss network.
Press MENU, select Settings and press OK.
ó
Select Handset Settings and press OK for confirmation.
ó
Select Area-Code and press OK.
ó
Select the Country-Code, Int. Prefix or Nat. Prefix and press OK.
ó
Enter the Number needed and press OK to store.
ó
Changing the handset PIN
To protect the handset settings from unauthorized access you should change
the handset PIN (factory setting: 0000) to a PIN that only you know.
Press MENU, select Settings and press OK.
ó
Select Handset Settings and press OK for confirmation.
ó
Select Handset PIN and press OK.
ó
Enter the current handset PIN (factory setting: 0000).
ó
Enter the new handset PIN (4 digits).
ó
Re-enter the new handset PIN to verify. If match the new handset PIN is saved.
ó
40
Factory settings for the handset
The phone book and the handset name are not deleted when you reset
the handset.
Press MENU, select Handset Set and press OK.
ó
Select Default Set and press OK.
ó
Enter the handset PIN (factory setting: 0000).
ó
Display „Reset all Setting?".
ó
Press OK.
ó
Display „All Settings Reset".
ó
Function After Reset
Registered base stations Also registerd
Phone book Not deleted after reset
Delete in phone book menu
Combox number Not deleted
Handset name INT (X)
Receiver volume 2
Handsfree volume 4
Ringer volume 4
Ringer melody (general and VIP) 3
Key click On
Automatic answering Off
Language English
Handset PIN 0000
41