Table of Contents
Advertisement
Basic Steps to Install
Connect the output plug of the power adapter to the adapter socket on
ó
the back of the base unit and the main adapter to the wall power supply.
Connect the telephone line cord to the phone cord socket on the back of
ó
the base unit and to the line phone socket to the wall.
Place the 2 AAA batteries, observing their polarities, into the battery com-
ó
partment on the handset.
Slide the battery door firmly into place.
ó
Place the handset on the base unit and let the batteries charge for a full
ó
14 hours before using.
Switching the handset on and off
The handset is activated as soon as the batteries have been installed.
To switch on press the end
key.
To switch off make a long press - you will hear the beep sound.
The handset also is switched on automatically when it is placed in the base
station. If the handset is switched on by placing in the base station, the charging
status symbol
will display.
How to use this phone
Your telephone will be operated with a menu. The menu offers access to all
setting procedures and all of the telephone functions. Some menu items open
a sub-menu after the selection of menu item. The menu will be controlled by
the navigation key and by the softkeys. The exact functionality of every key is
described on page 9.
10
Switching Keypad Lock on and off
You can lock the handset keypad if you are carry the handset in your pocket
or bag. This prevents numbers being dialled by accident.
If there is an incoming call, the keypad is automatically unlocked and locked
again after the call has ended.
To lock and unlock, press
for more than 2 sec.
Note: Emergency numbers can be dialled also if the keypad lock is activated.
11
Advertisement
Table of Contents
Need help?
Do you have a question about the Aton CL302 and is the answer not in the manual?
Questions and answers