Siemens Simatic box pc 627b Operating Instructions Manual page 154

Detailed descriptions
16.4 BIOS Setup
"Hardware Options" field
The following submenu, for example, appears when you select "Hardware Options" in the
main menu:
Figure 16-9
The parameters of the interfaces present on the motherboard are set here.
Entry
PCI-MPI/DP
On-board Ethernet
On-board Ethernet
Address
On-board Ethernet
Remote Boot
SafeCard functions
16-36
"Hardware Options" submenu (example)
Meaning
[Enabled] Enables the CP5611-compatible MPI/DP interface. The
1)
resources are managed by the BIOS PCI Plug and Play
mechanism.
[Disabled] The CP5611 compatible MPI/DP interface is disabled.
[Enabled] The Ethernet port on the motherboard is enabled.
[Disabled] The Ethernet port on the motherboard is disabled.
Shows the individual Ethernet address.
[Enabled] Booting via a connected LAN is possible. The respective boot
source is displayed as Intel® Boot-Agent in the boot sequence
1)
menu.
[Disabled] Booting via LAN is not possible.
[Enabled] On-board monitoring functions are enabled.
[Disabled] No monitoring functions.
The relevant driver and the application must be started for operation of the
monitoring functions.
Operating Instructions, Release 05/2006, A5E00362052-03
SIMATIC Box PC 627