Bios Setup Menus - Siemens Simatic box pc 627b Operating Instructions Manual

Detailed descriptions
16.4 BIOS Setup
16.4.3

BIOS Setup menus

The various menus and submenus are listed on the next pages. You can obtain information
on the selected SETUP item from the "item-specific help" part of the respective menu.
Figure 16-1
(1) Header
(2) Menu line
(3) Selectable submenu
Menu layout
The screen is divided into four sections. In the top part (2), you can select the menu forms
[Main], [Advanced], [Security], [Boot], [Version], [Exit]. In the left of the center section (3) you
can select various settings or submenus. Brief help texts appear on the right (4) for the
currently selected menu entry. The bottom section contains information for operator input.
The figures below represent examples of specific device configurations. The screen content
changes based on the supplied equipment configuration.
Yellow stars to the left of the interface designation (for example, Internal COM 1) indicate a
resource conflict between the interfaces managed by the BIOS. In this case you should
select the default settings (F9) or eliminate the conflict.
You can move between the menu forms using the cursor keys [←] left and [→] right.
16-26
SETUP main menu (example)
(4) Help view
(5) Input line
Operating Instructions, Release 05/2006, A5E00362052-03
SIMATIC Box PC 627