Siemens Simatic box pc 627b Operating Instructions Manual page 63

Inserting the slider
To insert the slider:
How to install a slider
1
Caution
No pressure should be applied to the module! Therefore, do not apply excessive force to the
slider when you push it onto the module.
2
Notes on the Allocation of Resources
The two slots for the PCI cards each have an exclusive interrupt. Information on the
assignment of PCI IRQs to the PCI slots is found in the "Advanced Menu" or "Bus Board"
section.
SIMATIC Box PC 627
Operating Instructions, Release 05/2006, A5E00362052-03
Push the slider through the guide
slot until it is seated firmly on the
module. Insert the module into the
slot.
Cut off the rest of the slider:
Use a knife to notch the slider
at the upper edge of the
bracket and then break this
section off. Cut off the residual
element using a side cutter.
Expansions and configuration
10.3 Installing PCI expansion cards
10-7