Removing/Installing The Power Supply - Siemens Simatic box pc 627b Operating Instructions Manual

11.1.3

Removing/Installing the Power Supply

Warning
Only qualified personnel is authorized to exchange the power supply module.
Preparations
1. Disconnect the device from mains and unplug all cables.
2. Open the device.
Removing the power supply module
How to remove the power supply module
1
2
SIMATIC Box PC 627
Operating Instructions, Release 05/2006, A5E00362052-03
Remove the hard disk,
DVD-ROM/CD-RW drive bay
module.
Unscrew 5 screws (1) and remove
the power supply module cover.
11.1 Removing and installing hardware components
Maintenance and service
11-5