Installing Pci Expansion Cards; Notes On The Modules; Installing / Removing Expansion Modules - Siemens Simatic box pc 627b Operating Instructions Manual

Expansions and configuration

10.3 Installing PCI expansion cards

10.3 Installing PCI expansion cards
10.3
10.3.1

Notes on the modules

The device is designed for use with modules conforming to PCI specifications V 2.2. PCI
modules with 5 V and 3.3 V supply voltage can be operated. The permitted dimensions of
the modules are found in the dimensional drawings section.
10.3.2

Installing / removing expansion modules

Preparation
Disconnect the device from mains.
Installing expansion modules
How to install an expansion module (PCI):
1
2
3
4
5
6
7
10-6
Open the device.
1 Remove the fastening screws (1)
and lift out the module bracket (2).
Remove the relevant steel slot
cover (5).
Insert the expansion module (4)
into the relevant slot.
Pay attention to the guide rail (6)
when using long PCI modules.
Install the module bracket and
insert the slider (3).
Screw down the steel slot cover (5)
for the expansion module.
Close the device.
Operating Instructions, Release 05/2006, A5E00362052-03
SIMATIC Box PC 627