Table of Contents
Advertisement
I
I
-
1
-
1
-
2
W
I
I
-
1
-
1
-
2
W
Ethernet is the Physical Mode for WAN2.
Available settings are explained as follows:
Item
Enable
Display Name
Physical Mode
Physical Type
Line Speed
VLAN Tag insertion
Active Mode
Vigor2832 Series User's Guide
A
N
2
(
E
t
h
e
r
n
e
t
)
A
N
2
(
E
t
h
e
r
n
e
t
)
Description
Choose Yes to invoke the settings for this WAN interface.
Choose No to disable the settings for this WAN interface.
Type the description for such WAN interface.
Display the physical mode of such WAN interface.
You can change the physical type for
WAN1/WAN2/WAN3/WAN4 or choose Auto negotiation for
determined by the system.
If your choose According to Line Speed as the Load
Balance Mode, please type the line speed for downloading
and uploading for such WAN interface. The unit is kbps.
Enable – Enable the function of VLAN with tag.
The router will add specific VLAN number to all packets on
the WAN while sending them out.
Please type the tag value and specify the priority for the
packets sending by WAN1.
Disable – Disable the function of VLAN with tag.
Tag value – Type the value as the VLAN ID number. The
range is form 0 to 4095.
Priority – Type the packet priority number for such VLAN.
The range is from 0 to 7.
Choose Always On to make the WAN1/WAN2/WAN3/WAN4
connection being activated always.
Load Balance: Check this box to enable auto load balance
function for such WAN interface.
When the data traffic is large, the WAN interface with the
function enabled will balance the data transmission
57
Advertisement
Table of Contents
