Table of Contents
Advertisement
WAN links for Channel 5, 6 and 7 are provided for router-borne application such as TR-069.
The settings must be applied and obtained from your ISP. For your special request, please
contact with your ISP and then click WAN link of Channel 5, 6 or 7 to configure your router.
Available settings are explained as follows:
Item
Multi-VLAN Channel 5/6/7
WAN Type
General Settings
90
Description
Enable – Click it to enable the configuration of this channel.
Disable –Click it to disable the configuration of this channel.
The connections and interfaces created in every channel may
select a specific WAN type to be built upon. In the Multi-PVC
application, only the Ethernet WAN type is available. The
user will be able to select the physical WAN interface the
channel shall use here.
VPI - Type in the value provided by your ISP.
VCI - Type in the value provided by your ISP.
Protocol - Select a proper protocol for this channel.
Encapsulation - Choose a proper type for this channel. The
types will be different according to the protocol setting that
you choose.
Add VLAN Header – Check the box to enable the following
Vigor2832 Series User's Guide
Advertisement
Table of Contents
