Draytek Vigor 3220 SERIES User Manual page 311

Comments
Index(1-15)
Clear sessions when
schedule ON
Direction
Source/Destination IP
Service Type
Vigor2832 Series User's Guide
Enter filter set comments/description. Maximum length is 14-
character long.
Set PCs on LAN to work at certain time interval only. You
may choose up to 4 schedules out of the 15 schedules
pre-defined in Applications >> Schedule setup. The default
setting of this field is blank and the function will always
work.
Check this box to clear the sessions when the above schedule
profiles are applied.
Set the direction of packet flow. It is for Data Filter only. For
the Call Filter, this setting is not available since Call Filter is
only applied to outgoing traffic.
Note: RT means routing domain for 2nd subnet or other LAN.
Click Edit to access into the following dialog to choose the
source/destination IP or IP ranges.
To set the IP address manually, please choose Any
Address/Single Address/Range Address/Subnet Address as
the Address Type and type them in this dialog. In addition, if
you want to use the IP range from defined groups or objects,
please choose Group and Objects as the Address Type.
From the IP Group drop down list, choose the one that you
want to apply. Or use the IP Object drop down list to choose
the object that you want.
Click Edit to access into the following dialog to choose a
suitable service type.
299