Table of Contents
Advertisement
Force router to use DNS
server IP address .....
Inter-LAN Routing
When you finish the configuration, please click OK to save and exit this page.
Vigor2832 Series User's Guide
Enable/Disable – Enable/Disable the function of DHCP
Option. Each DHCP option is composed by an option number
with data. For example,
Option number:100
Data: abcd
When such function is enabled, the specified values for DHCP
option will be seen in DHCP reply packets.
Interface – Choose the interface for such option.
Next Server IP Address/SIAddr – Type the IP address for the
next server. Vigor router's DHCP server can redirect clients
to a secondary server specified in such field.
Option Number – Type a number for such function.
DataType – Choose the type (ASCII or Hex or address list) for
the data to be stored.
Data – Type the content of the data to be processed by the
function of DHCP option.
Force Vigor router to use DNS servers configured in
LAN1/LAN2/LAN3/LAN4 instead of DNS servers given by the
Internet Access server (PPPoE, PPTP, L2TP or DHCP server).
Check the box to link two or more different subnets (LAN and
LAN).
113
Advertisement
Table of Contents
