To use Advance Mode, do the following steps:
1. Click the Advance Mode radio button.
2. Click Index 2 to access into the following page.
Available settings are explained as follows:
Item
Enable
Protocol
Source IP
182
Description
Check this box to enable this policy.
Use the drop-down menu to choose a proper protocol for the
WAN interface.
Any – Any IP can be treated as the source IP.
Src IP Start - Type the source IP start for the specified WAN
interface.
Src IP End - Type the source IP end for the specified WAN
interface. If this field is blank, it means that all the source
IPs inside the LAN will be passed through the WAN interface.
Vigor2832 Series User's Guide