Table of Contents
Advertisement
E
x
a
m
p
l
E
x
a
m
p
As stated before, all the traffic will be separated and arbitrated using on of two IP filters: call
filter or data filter. You may preset 12 call filters and data filters in Filter Setup and even link
them in a serial manner. Each filter set is composed by 7 filter rules, which can be further
defined. After that, in General Setup you may specify one set for call filter and one set for
data filter to execute first.
Vigor2832 Series User's Guide
e
l
e
small value will be proper.
Session timeout–Setting timeout for sessions can make the
best utilization of network resources. However, Queue
timeout is configured for TCP protocol only; session timeout
is configured for the data flow which matched with the
firewall rule.
DrayTek Banner – Please uncheck this box and the following
screen will not be shown for the unreachable web page. The
default setting is Enabled.
Strict Security Checking - All the packets, while
transmitting through Vigor router, will be filtered by firewall
settings configured by Vigor router. When the resource is
inadequate, the packets will be blocked if Strict Security
Checking is enabled. If Strict Security Checking is not
enabled, then the packets will pass through the router.
303
Advertisement
Table of Contents
