Table of Contents
Advertisement
After finished the above settings, click OK to save the settings and return to previous page.
A
d
v
a
n
c
e
A
d
v
a
n
c
e
Such configuration is applied to upstream packets. Such information will be provided by ISP.
Please contact with your ISP for detailed information.
92
d
d
parameters according to the information provided by your
ISP.
ISP Name – Type in the name of your ISP.
Username – Type in the username provided by ISP in this
field. The maximum length of the name you can set is 80
characters.
Password – Type in the password provided by ISP in this
field. The maximum length of the password you can set is
48 characters.
PPP Authentication – Select PAP only or PAP or CHAP for
PPP.
Always On – Check it to keep the network
connection always.
Idle Timeout – Set the timeout for breaking down
the Internet after passing through the time without
any action.
Fixed IP – Click Yes to use this function and type in a
fixed IP address in the box of Fixed IP Address.
If MPoA is selected, you have to configure the settings
listed under MPoA .
Obtain an IP address automatically – Click this button to
obtain the IP address automatically.
Router Name – Type in the router name provided by
ISP.
Domain Name – Type in the domain name that you
have assigned.
Specify an IP address – Click this radio button to specify
some data.
IP Address – Type in the private IP address.
Subnet Mask – Type in the subnet mask.
Gateway IP Address – Type in gateway IP address.
DNS Server IP Address - Type in the primary IP address for
the router if you want to use Static IP mode. If necessary,
type in secondary IP address for necessity in the future.
Vigor2832 Series User's Guide
Advertisement
Table of Contents
