Table of Contents
Advertisement
IPsec Security Method
After finishing all the settings here, please click OK to save the configuration.
I
V
-
1
-
6
I
P
I
V
-
1
-
6
I
P
To use digital certificate for peer authentication in either LAN-to-LAN connection or Remote
User Dial-In connection, here you may edit a table of peer certificate for selection. As shown
below, the router provides 100 entries of digital certificates for peer dial-in users.
Available settings are explained as follows:
Item
Set to Factory Default
Index
Vigor2832 Series User's Guide
Key.
Certificate for Dial-in –Choose one of the local certificates
from the drop down list.
Pre-Shared Key- Specify a key for IKE authentication.
Confirm Pre-Shared Key- Retype the characters to confirm
the pre-shared key.
Note: Any packets from the remote dial-in user which does
not match the rule defined in VPN and Remote
Access>>Remote Dial-In User will be applied with the
method specified here.
Medium - Authentication Header (AH) means data will be
authenticated, but not be encrypted. By default, this option
is active.
High (ESP) - Encapsulating Security Payload (ESP) means
payload (data) will be encrypted and authenticated. You
may select encryption algorithm from Data Encryption
Standard (DES), Triple DES (3DES), and AES.
s
e
c
P
e
e
r
I
d
e
n
t
i
t
y
s
e
c
P
e
e
r
I
d
e
n
t
i
t
y
Description
Click it to clear all indexes.
Click the number below Index to access into the setting page
of IPsec Peer Identity.
235
Advertisement
Table of Contents
