Draytek Vigor 3220 SERIES User Manual page 149

Private IP
Choose IP
DMZ Host for WAN2, WAN3, or WAN4 is slightly different with WAN1. Active True IP selection
is available for WAN1 only.
See the following figure.
If you previously have set up WAN Alias for PPPoE or Static or Dynamic IP mode in WAN2
interface, you will find them in Aux. WAN IP for your selection.
Available settings are explained as follows:
Vigor2832 Series User's Guide
Choose Private IP or Active True IP first.
Active True IP selection is available for WAN1 only.
Enter the private IP address of the DMZ host, or click Choose
PC to select one.
Click this button and then a window will automatically pop
up, as depicted below. The window consists of a list of private
IP addresses of all hosts in your LAN network. Select one
private IP address in the list to be the DMZ host.
When you have selected one private IP from the above dialog,
the IP address will be shown on the screen. Click OK to save
the setting.
137