Table of Contents
Advertisement
Priority
Log
URL Access Control
318
It determines the action that this router will apply.
Both: Pass – The router will let all the packages that match
with the conditions specified in URL Access Control and Web
Feature below passing through. When you choose this
setting, both configuration set in this page for URL Access
Control and Web Feature will be inactive.
Both: Block –The router will block all the packages that
match with the conditions specified in URL Access Control
and Web Feature below. When you choose this setting, both
configuration set in this page for URL Access Control and Web
Feature will be inactive.
Either: URL Access Control First – When all the packages
matching with the conditions specified in URL Access Control
and Web Feature below, such function can determine the
priority for the actions executed. For this one, the router
will process the packages with the conditions set below for
URL first, then Web feature second.
Either: Web Feature First –When all the packages matching
with the conditions specified in URL Access Control and Web
Feature below, such function can determine the priority for
the actions executed. For this one, the router will process
the packages with the conditions set below for web feature
first, then URL second.
None – There is no log file will be recorded for this profile.
Pass – Only the log about Pass will be recorded in Syslog.
Block – Only the log about Block will be recorded in Syslog.
All – All the actions (Pass and Block) will be recorded in
Syslog.
Enable URL Access Control - Check the box to activate URL
Access Control. Note that the priority for URL Access
Control is higher than Restrict Web Feature. If the web
content match the setting set in URL Access Control, the
router will execute the action specified in this field and
ignore the action specified under Restrict Web Feature.
Prevent web access from IP address - Check the box to deny
any web surfing activity using IP address, such as
http://202.6.3.2. The reason for this is to prevent someone
dodges the URL Access Control. You must clear your browser
cache first so that the URL content filtering facility operates
properly on a web page that you visited before.
Action – This setting is available only when Either : URL
Access Control First or Either : Web Feature First is
selected.
Pass - Allow accessing into the corresponding webpage
Vigor2832 Series User's Guide
Advertisement
Table of Contents
