Cradlepoint IBR1100 User Manual page 93

User Manual / IBR1100/IBR1150
separate clients can connect to) or as a GPS client (which reports to a server). Set up a GPS Server, GPS Client, or
GPS Serial on the device by clicking on the Add button in the appropriate table.
• GPS Clients – Use this to set up a local client. This client will send periodic reports of GPS sentences to a
remote server.
• GPS Servers – Use this to set up a local server. Clients can connect to and receive GPS sentences from this
server.
• GPS Serial - Use this to set up a local serial. Clients can connect to and receive GPS sentences from this
server.
Send to Client(s)
• Enable this Server - Enables a local server to which clients can connect and recieve GPS sentences.
• Server Name - Your server's name should include only Aa-Zz, numerals, and '_'.
• Enable GPS server on LAN - Enables a server on the LAN side of the firewall which will periodically send GPS
sentences to TCP connected clients.
• Enable GPS server on WAN - Enables a server on the
WAN side of the firewall which will periodically send
GPS sentences to TCP connected clients.
• Port - Choose a port between 1 and 65535.
Language Settings (NMEA)
• Choose Language - NMEA
• Include System ID - Include the router's "System ID"
sentence with every data message. This can be useful
when a single remote client or server is handling GPS
position reports from multiple routers. This creates a
custom GPS sentence with the System ID as part of
the sentence and the checksum.
• Prepend System ID - Include the routers "System ID"
sentence with every GPS message. This can be useful
when a single remote client or server is handling GPS
position reports from multiple routers. This simply
prepends the system ID and a comma ahead of the
GPS sentence.
• Report NMEA GGA sentences - Report GPS fix using
NMEA GGA sentence format (if available).
• Report NMEA RMC sentences - Report GPS fix using
NMEA RMC sentence format (if available).
• Report NMEA VTG sentences - Report GPS fix using
NMEA VTG sentence format (if available).
Depending on your selections (and other possible factors),
reporting may include proprietary sentences. For example,
if you select Include System ID, the report will include
proprietary sentences of the following format (in addition
to the standard sentences):
$PCPTI,{System ID},{router timestamp},{GGA
timestamp},{GGA checksum}*{checksum}
NOTE: "PCPTI" stands for Proprietary, CradlePoinT,
Identification (P-CPT-I).
Language Settings (TAIP)
©2016 Cradlepoint. All Rights Reserved. | +1.855.813.3385 | cradlepoint.com
7/15/16
93