Quick Start; Basic Setup - Cradlepoint IBR1100 User Manual

User Manual / IBR1100/IBR1150

QUICK START

BASIC SETUP

1. Insert an activated SIM
A wireless broadband data plan must be added to your Cradlepoint IBR1100. Wireless broadband data plans are
available from wireless carriers such as Verizon, AT&T, Sprint, EE, and Vodafone. The SIM must be provisioned
with the carrier. Contact your carrier for details about selecting a data plan and about the process for
provisioning your SIM.
Once you have an activated SIM, insert it into the integrated modem. Insert the SIM card into the slot marked
SIM 1 (use the other slot, SIM 2, for a secondary/backup SIM).
2. Attach the WiFi and modem antennas
Attach the three WiFi antennas (included) and two modem antennas to the connectors. Antennas are jointed,
which enables you to position them for optimal signal. To attach, hold the antenna straight and twist the base
of the antenna to connect, folding the joint if needed. NOTE: Ensure that the router antennas are not near metal
or other RF reflective surfaces.
3. Connect to power source
Wire power cable to 9-36v power source. (AC power supply sold separately.)
To insert or remove SIM card:
1. Remove bottom SIM cover.
2. Slide metal latch down to unlock.
3. Pull cartridge upward, so it is standing at a 90° angle.
4. Insert SIM card with metal contacts down and notch out.
5. Press cartridge back into place.
6. Return metal latch to start (lock) position.
7. Replace bottom SIM cover.
Note: Device will not power on without cover in place.
©2016 Cradlepoint. All Rights Reserved. | +1.855.813.3385 | cradlepoint.com
7/15/16
17