Diagnostics - Cradlepoint IBR1100 User Manual

User Manual / IBR1100/IBR1150
• Current Package Version: Displays the current firmware package version loaded on the modem.
• Available Firmware Version: Displays the firmware version available for upgrade or indicates status of the
current firmware. If new firmware is available, the available upgrade version is displayed.
• Upgrade: Click this button to download the Available Firmware Version file and perform this over-the-air
upgrade. If a connection error occurs, it is possible that HTTPS is blocked for the upgrade check. Enable Allow
HTTP Firmware Check in SYSTEM > System Control >System Firmware to address this issue.
• Check: Click this button to refresh or update the Available Firmware Version status column.
• File: Click this button to manually upload a modem firmware file. Type the path/file or click Select Firmware
File to browse to the local file location. Once entered, click Begin Firmware Upgrade. Note: For modems which
support manual carrier switching, find the appropriate modem firmware package file via ECM or the Cradlepoint
portal.
DEVICE OPTIONS
Reboot Options
• Reboot the Device: Manually restart the router.
• Factory Reset Router: Reset the router to its
original settings. Once reset your SSID and admin
password will match the sticker on the bottom of
the router.
• Device Console: Access router's command line
interface (CLI) console.
Scheduled Reboot
• Scheduled Reboot: Router will restart at user-
specified time.
• Enable Watchdog Reboot: Router will restart when
it determines an unrecoverable error condition has
occurred.

DIAGNOSTICS

Ping Test
A simple test to check Internet connectivity. Type the Hostname or IP address of the computer you want to ping
and click the 'Ping' button.
Speed Test
• Tests Against Cradlepoint Server - Up to ten speed tests are permitted against a Cradlepoint server.
• WAN Device - The WAN Device that is selected will have the test run on it. If no device is selected then the
highest priority connected device will be used.
• Custom Server - Type the Hostname or IP address of the server to which you wish to perform a test. If left
empty the test will be done to a Cradlepoint server.
©2016 Cradlepoint. All Rights Reserved. | +1.855.813.3385 | cradlepoint.com
7/15/16
106