User Manual
/
IBR1100/IBR1150
•
Authentication Required: For Gmail, mark this checkbox.
•
User Name: Your full email address
•
Password: Your Gmail password
•
From Address: Your email address
•
To Address: Your email address
Once you have filled in the information for the SMTP server, click on the "Verify SMTP Settings" button. You
should receive a test email at your account.
Delivery Options (Advanced)
Email Subject Prefix: This optional string is prefixed to the alert subject. It can be customized to help you
identify alerts from specific routers.
Retry Attempts: The number of attempts made to send an alert to the mail server. After the attempts are
exhausted, the alert is discarded.
Retry Delay: The delay between retry attempts.
SERIAL REDIRECTOR
A single USB Serial device can be used to establish a serial link to a host port on the router. The USB Serial
device can also be accessed by running "serial" from an SSH session.
Telnet to Serial Configuration
•
Enabled: Enabling Telnet to Serial will start a Telnet server that
passes its connection to the serial adapter. Enabling this service
is not necessary when accessing serial through SSH.
•
LAN: Enable serial redirector for LAN connections.
•
Authenticated LAN: Enable serial redirector for Authenticated
LAN connections. You must be logged into the router to use the
redirector.
•
WAN: Enable serial redirector for WAN connections.
•
Server Port: Enter a port number for the redirector to use. (Default: 7218)
GPIO CONFIGURATION
Serial GPIO cable is a feature that converts the RS-232 port into
three input pins. Those pins can be used to create alerts when their
state is changed.
Wiring reference:
GPIO 1 - pins 7, 8 on serial cable
GPIO 2 - pins 2, 3 on serial cable
GPIO 3 - pins 4, 6 on serial cable
The GPIOs on serial cable will not work —even if
individually enabled — until Enable Serial GPIO Cable
checkbox is selected.
©2016 Cradlepoint. All Rights Reserved.
|
+1.855.813.3385
|
cradlepoint.com
7/15/16
101