Accessing The Administration Pages; First Time Setup Wizard - Cradlepoint IBR1100 User Manual

User Manual / IBR1100/IBR1150

ACCESSING THE ADMINISTRATION PAGES

Once you are connected, open the Cradlepoint IBR1100's GUI-based administration pages to make configuration
changes to your router.
1. Open a browser window and type "cp/" or "192.168.0.1" in the address bar. Press ENTER/RETURN.
2. When prompted for your password, type the eight character DEFAULT PASSWORD found on the product
label.
NOTE: The product label below is an example only: your DEFAULT PASSWORD and SSID will be unique.
It's possible – and more efficient – to do all your configuration changes through Cradlepoint
Manager (ECM) without logging into the local administration pages. Set up a group of routers and set the
configuration for all of them at once. See

FIRST TIME SETUP WIZARD

When you log in for the first time, you will be automatically directed to the FIRST TIME SETUP WIZARD, which
will walk you through the steps to customize your Cradlepoint AER3100. You have the ability to configure any of
the following:
• Administrator Password
• Time Zone
• WiFi Network Name
• Security Mode
• Access Point Name (APN) for SIM-based modems
• Modem Authentication
• Failure Check
If you are currently using the router's WiFi network, you will need to reconnect your devices to the network
using the newly established wireless network name and password.
NOTE: To return to the First Time Setup Wizard after your initial login, select SYSTEM from the navigation bar,
expand Setup Wizard, and select First Time Setup.
below
for more information about ECM.
©2016 Cradlepoint. All Rights Reserved.
Enterprise Cloud
| +1.855.813.3385 | cradlepoint.com
7/15/16
18