Edit Name; Set Frequency; Set Tone; Set Delay Time - Uniden UBCD436-PT Owner's Manual

Edit Name

Set frequency

Set Tone

Edit Name
See Data Naming, page 25.
Set Frequency
Edit Frequency
Enter the frequency and press E/yes.
Set Modulation
Auto, NFM, FM
Set Attenuator
On or Off
Set Tone
Edit Tone A and press E/yes. Enter the tone and press E/yes to save.
Edit Tone B and press E/yes. Enter the tone and press E/yes to save.
Press Menu to return.
For two-tone pages, enter the tones (in Hz) for tone A and tone B.
For one-tone pages using short tones between 1.25 and 3.75 seconds, enter tone for
tone A, and 0 for tone B.
For long-tone pages, such as group pages of more than 3.75 seconds, enter 0 for tone
A, and the tone for B.
To search for tones, leave the tones for A and B at 0.

Set Delay Time

0 - the scanner resumes standby as soon as the carrier drops after a page.
1, 2, 3, 4, 5, 10, 30 - (seconds): the scanner resumes standby mode after the carrier drops
and the selected time expires.
Infinite - you must press Hold after a page to resume standby mode.

Set Alert

Set Alert Tone
Alert 1-9 or Off.
Set Level
Level 1-15 or Auto (the master volume level).
Set Alert Light
Set Color
Off, Blue, Red, Magenta, Green, Cyan, Yellow, or White.
Set Pattern
On, Slow Blink, or Fast Blink.

Set Audio AGC

This allows you to turn AGC (Automatic Gain Control) on or off for Tone-Out operations. The
default setting is Off.
Start delay Time
Set Alert
Set Audio AGC
77