New Session; Session Options; Start Discovery; Edit Session Name - Uniden UBCD436-PT Owner's Manual

Press Menu then scroll to Discovery and press E/yes.
Scroll to Trunking Discovery or Conventional Discovery and press E/yes.
Scroll to New Session and press E/yes.
Conventional Discovery
Input Session Name - Enter the Name and press E/yes. See Data Naming, page 25.
Trunking Discovery
Input System Name - Enter the first few relevant letters of the system and press E/yes.
See Data Naming, page 25.
Note: The System must be enabled for scan to input system name.
Select System - Scroll to the System and press E/yes.
Select Site - Scroll to the Site and press E/yes.
Input Session Name - Enter the Name and press E/yes. See Data Naming, page 25.

SESSION OPTIONS

Press Menu then scroll to Discovery and press E/yes.
Scroll to Trunking Discovery or Conventional Discovery and press E/yes.
Scroll to the Discovery Session and press E/yes.

Start discovery

Edit Session Name

Set Limit frequencies
Set Modulation
Set Step
Set delay
Set Logging
Start Discovery
This starts the Discovery Session.
Press Menu to stop and review the Run information. See Review Discovery, page 62.
Press Avoid to Avoid a hit.
Press Func then System to exit.
Edit Session Name
This allows you to name a Session.
See Data Naming, page 25.

Set Limit Frequencies (Conventional Only)

This sets the lower and upper frequencies for conventional discovery session.
Set Lower Limit Enter the lower limit.
Set Upper Limit Enter the upper limit.
60

NEW SESSION

Set Compare to database
Set Record duration
Set Time-Out Timer
System Information
Set Auto Store
delete Session
Change System