Number Tags; Alerts; Managing Favorites Lists; New Favorites List/ Favorites List Options - Uniden UBCD436-PT Owner's Manual

Hide thumbs Also See for UBCD436-PT:
Table of Contents

Advertisement

NUMBER TAGS

Numbers tags will allow you to tag each Favorites List, System, and Channel to locate easier.
Number tags can range from 0 to 99 for Favorites Lists and Systems and 0-999 for Channels.
You can assign number tags to channels even if the Favorites List does not have a number tag
but, without a Favorites List number tag, you can only navigate to these channels while holding or
scanning in that Favorites List. See also Using Number Tags, page 56.

ALERTS

You can program your scanner to alert you when, a Channel or Unit ID is received, you receive
a Close Call hit, an ID is transmitted with an Emergency Alert or you receive a Tone-out hit. For
each alert in the scanner, you can select from 9 different tone patterns, 15 volume settings, 7
colors, and 3 flash patterns.

MANAGING fAvORITES LISTS

Favorites Lists hold all your Systems, Sites, Departments, and Channels. You should assign a
Quick Key to every Favorites List to quickly enable or disable the list. You can assign a Favorites
List to a Favorites List Quick Key.

NEW fAvORITES LIST/ fAvORITES LIST OPTIONS

Press Menu then scroll to Manage Favorites and press E/yes.
To Create a New Favorites List, scroll to New Favorites List and press E/yes.
To Edit a Favorites List, scroll to the Favorites List and press E/yes.
Scroll to the options below and press E/yes. (Reformatted table below)
Review/Edit System
Set fL Quick Key
Set fL Number Tag
Set fL Startup Key
Review/Edit System – See Programming Systems, page 36.
Set FL Quick Key – This assigns a quick key to the Favorites List and will scan the list when the
key is enabled. The default setting is . (no quick key). If you don't assign a Favorite Lists to a quick
key, it will always be scanned unless you turn it off in Select Lists to Monitor. See also Set Scan
Selection, page 47.
Scroll to the quick key number (0-99 or . for no quick key) and press E/yes to save.
Note: Pressing the first number of a 2-digit quick key will get you closer, 1 for 10, 2 for 20,
etc., then scroll to second digit.
Set FL Number Tag – This allows you to number a Favorites List so you can access it quickly
from scan hold mode. See also Using Number Tags, page 56.
The default setting is no number tag.
Enter the number tag (0-99) and press E/yes to save. Enter a blank for no number tag.
Set FL Startup Key – This allows you to turn on the scanner with the Favorites List enabled for
scan. The default settings are all keys Off.
34
Use Location Control
Review Avoids
Stop All Avoiding
Add Current dB Channels
Rename
delete
Information

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ubcd536-pt

Table of Contents