Uniden UBCD436-PT Owner's Manual page 48

Enter the hold time and press E/yes to save.
0-255
ID Search – This sets whether the scanner searches for all IDs in a trunking system (On), or
scans only programmed IDs (Off).
The default setting is Off. also ID Toggle ID Scan or Search, page 53.
On or Off
Edit Fleet Map (Motorola Type I/ll systems Only) – This allows you to program a fleet map
for Motorola Type I Systems. You must program a system fleet map in order for the scanner to
properly track and display talk group IDs.
Block 0 Scroll to the size code (0-14) and press E/yes.
The next available block is prompted to select the next size code (0-14).
Repeat for each block as needed (0-7).
Note: If you select size code 12, 13, or 14, these restrictions apply:
12 can only be assigned to Blocks 0, 2, 4 or 6.
13 can only be assigned to Blocks 0 and 4.
14 can only be assigned to Block 0.
Since these size codes require multiple blocks, you will be prompted for the next
available block. Example: If you assign Block 0 as 12, the scanner prompts you for block
2, the next block available, instead of block 1.
Priority ID Scan (no P25 One Freq) – This allows you to use Priority Scan with IDs in the
System. The default setting is Off. See also Priority Scanning on page 49.
On or Off
Set Status Bit (Motorola Only) – This sets how your scanner works with Status Bits (also called
S-bits), letting you control how the scanner interprets and displays Motorola talk group IDs. The
default setting is Ignore.
Yes. The scanner treats all received IDs as unique IDs.
Ignore. The scanner rounds all received IDs down to the next interval of 16.
Set End Code (Motorola Only) – This sets how the scanner handles the transmission end code
sent by most Motorola Systems.
The default setting is Analog.
Analog. The scanner recognizes only analog end transmission codes.
Analog+Digital. The scanner recognizes both analog and digital end codes.
Ignore. The scanner waits for the carrier to drop before leaving a channel.
Emergency Alert (Motorola/EDACS Only) – This sets how your scanner alerts you to IDs that
have the emergency flag set. The default setting is Off.
Set Alert Tone
Alert 1-9 or Off.
Set Level
Level 1-15 or Auto (the master volume level).
Set Alert Light
Set Color
Off, Blue, Red, Magenta, Green, Cyan, Yellow, or White.
Set Pattern
38