Programming Departments; New Department/Department Options; Department Options - Uniden UBCD436-PT Owner's Manual

PROGRAMMING dEPARTMENTS

NEW dEPARTMENT/dEPARTMENT OPTIONS

Press Menu then scroll to Manage Favorites and press E/yes.
Scroll to the Favorites List you want to manage and press E/yes.
Scroll to Review/Edit System and press E/yes.
Scroll to the System you want to edit and press E/yes.
Scroll to Edit Department and press E/yes.
To Create a New Department, scroll to New Department and press E/yes.
To Edit an Existing Department, scroll to the Department and press E/yes.

dEPARTMENT OPTIONS

Edit Name
Set department Quick
Key
Edit Channel
Edit Name
See Data Naming, page 25.
Set Department Quick Key – This assigns a quick key to the Department and the scanner will
scan the Department when the key is enabled. The default setting is . (no quick key). If you don't
assign a quick key to a Department, it will always be scanned unless you Avoid it.
0-99 or . for no quick key.
Note: Pressing the first number of a 2-digit quick key will get you closer, 1 for 10, 2 for 20,
etc., then scroll to second digit.
Edit Channel
See Channel Options, page 45.
Set Location Information – This allows you program a location for the Department to use with
Location Control enabled or with a GPS. You can program a circle with a radial range or multiple
rectangles as a location.
See Set Up GPS, page 24, first to set your location format and the baud rate.
Circle
Set Latitude
Enter the latitude. Press ./no to toggle N or S, and press E/yes.
Set Longitude
Enter the longitude. Press ./no to toggle E or W, and press E/yes.
Set Range See also Understanding Range, page 24.
0-6000
Rectangles
New Rectangle
Latitude - Top Left
Enter the latitude. Press ./no to toggle N or S, and press E/yes.
Set Location Information
Set Avoid
delete department
New department
43