Table of Contents
Advertisement
Receive
displays Modulation for the channel/site in Function mode (uBCd536-PT only) .
Mode
displays Modulation for the channel in receive/hold mode (uBCd436-PT only) .
V+/-N
displays Volume offset for the channel in Function mode (uBCd536-PT only) .
displays Volulme offset for the channel in receive/hold mode (uBCd436-PT only) .
IFX
displays if intermediate exchange is enabled for the frequency in receive/hold
modes .
aTT
displays to show channel attenuation in receiving/hold modes .
displays to show search attenuation in search mode .
aTT blinks to indicate global attenuation .
P25
displays if the channel is receiving digitalized voice in receive/hold modes .
PT0
displays if the channel is receiving Phase ii time slot 0 in receive/hold modes .
PT1
displays if the channel is receiving Phase ii time slot 1 in receive/hold modes .
lnK
displays when data is received on a voice channel in receive/hold modes .
daT
displays when data is received on a control channel in receiving or hold modes .
enC
displays if the channel is receiving encrypted voice and is muted in receiving or
hold modes .
Wx
displays if the Weather alert Priority feature is on .
system name
displays in scan/hold/receive modes .
search with
displays to show the search with scan system in scan/hold/receive modes .
scan
avoid/hold
displays system or department avoid/hold status next to system or department
(system or
name in hold/Pause modes .
department)
Temporary avoids appear reversed -
department
displays for a conventional system in scan/hold/receive modes .
name
displays for a trunked system in receive/hold modes .
Custom search
displays the Custom search or Close Call hits department in the search with scan
name
system in scan/receive/hold modes .
site name
displays for a trunked system in scan mode .
search
displays in search mode .
Frequency
Modulation
displays in search mode .
scanning
displays for a conventional system in scan mode .
id scanning/
displays for a trunked system in scan mode .
searching
Channel name
displays in receiving/hold modes .
avoid/hold
displays Channel avoid/hold status next to channel name in hold/Pause modes .
(Channel)
Temporary avoids appear reversed -
displays for a Priority channel in receiving/hold modes .
Channel
displays in receiving/hold modes (uBCd536-PT only) .
service Type
displays in receive/hold modes with disp . unit id set to off (uBCd436-PT only) .
TGid
displays for a trunked site in receive/hold modes .
.
.
29
Hide quick links:
Advertisement
Table of Contents
