Spring Adapter For The Water Connection; How To Adjust The Upper Basket - Miele G 7881 Installation And Operating Instructions Manual

Application
Spring adapter for the water
connection
The spring adapter for the water
connection must be properly engaged
when a basket is inserted into the
machine. In other words, the adapter
must be 4 - 5 mm higher than the water
inlet in the machine.
If this is not the case, the adapter
needs to be adjusted as follows:
^ Loosen the locking ring a.
^ Move the adapter up to the proper
height b.
^ Tighten down the locking ring c.
24

How to adjust the upper basket

The upper basket can be adjusted
above and below the middle position
by 2 cm each.
Depending on the height selected, and
which inserts are used, items of various
heights can be arranged in the baskets.
To adjust the upper basket:
^ Pull the upper basket out as far as it
will go, lift it up off the runners and
remove.
^ Use a 7mm wrench to unscrew the
roller bearings on either side of the
basket, then reposition as desired.