How To Load The Machine - Miele G 7881 Installation And Operating Instructions Manual

How to load the machine

– Always load items in such a way that
all surfaces will be exposed to the
cleaning water. This ensures that the
items will be properly clean.
– Do not nest any items inside other
items. Keep each item separate.
– Hollow items must be arranged for
complete inside exposure to the
cleaning water.
– Ensure that instruments with long
narrow hollow sections can be
flushed through properly before
placing them in inserts or connecting
them to jets.
– Hollow items should be inverted and
placed in suitable baskets and
inserts so that the water will have
unrestricted access and exit.
– Deep-based items should be
arranged at an angle, so that water
can run off easily.
– Tall narrow pieces should be placed
in the center of the basket for best
water coverage.
– Lightweight items should be secured
with a cover net (e.g. an A 6) and
small items placed in a mesh tray to
prevent them blocking the spray
arms.
– Baskets and inserts with an adapter
must be properly connected.
– The spray arms must not be blocked
by items that are too tall or hang
through the baskets.
– To avoid corrosion, only load
stainless steel items in good
condition.
– Do NOT use this machine to wash
nickel-plated items or discolored
(oxidized) aluminum items.
– Do not load plastics unless they are
heat-resistant.
– NEVER process disposable items in
the washer-disinfector.
Prepare items before loading
^ Empty all items before loading into
the machine. Comply with all
applicable infection-control
regulations.
,
Ensure that no acid or solvent
residues, especially hydrochloric
acid or chlorides, get inside the
machine.
Item sorting
Contaminated items should be placed
directly in the washer-disinfector
without pre-treatment (dry handling).
Application
23