^ Wipe any residual salt off the seal
and the screw threads on the
reservoir.
^ Screw the cap back on completely.
^ Immediately after this step, start the
"Rinse" program, to remove any
traces of salt from the inside of the
machine.
Note: There may be a delay of a few
minutes before the "Rinse" program
starts - this is normal. It simply
means the water softener is being
reactivated as needed.
Refill Salt Indicator
The water softener is automatically
regenerated during the next program
cycle.
The program display will show a
Recharging during this process.
^ Add regeneration salt whenever the
Refill salt indicator b Recharge is on.
Water softener
21